金科JK690一體式全液壓潛孔鉆機(全自動換桿）性能參數 

金科JK690一體式全液壓潛孔鉆機(全自動換桿）性能參數

JK690一體式全液壓潛孔鉆機是一款可以為您帶來 更高自動化、更高鉆進效率的產品，運行可靠，操作簡單。鉆機與空壓機一體化設計，解決了礦山空壓機移動與遠距離管理以及壓縮空氣耗損，占用多余人力的傳統難題。配備高性能液壓除塵系統滿足礦山的環保要求，是現代綠色礦山開采的可靠解決方案。

JK690 is an All-In-One DTH drilling rig, which brings you moreautomation, higher working efficiency, better reliability andsimpler operation. The integration of drilling rig and air compres-

sor, the design has many advantages like facilitating air compres-sor transport and management on mining site,retaining more air energy and requiring less manpower. The equipped high-perfor-mance hydraulic dust collecting system meets the latest environ-mental protection regulations and it's a reliable solution to realize the modern green mining.

金科鉆機與阿特拉斯空壓機強強聯合，

性能出色的一體機帶給您完全不一樣的鉆鑿感受。

回轉系統

回轉扭矩大，減速比大，扭矩傳遞效率更高運行更平穩，故障率更低，降低了日常維護成本，松散層不易卡鉆，成孔率高。高分子襯板，耐磨、不需注油潤滑，更方便。錳鋼機加導軌，架體堅固、導軌無磨損。選配雙驅高低速回轉系統。

Rotation unit system

The gearbox has large gear reductionratio, high torque transmission efficiency ,runs smoothly, lowered failure rate and with less routine maintenance cost. It also reduces pipe-stuck situations in unconsolidated formations and has a higher hole completion rate.

Polymer liner plates are high resistant to abrasion, no need lubricating grease so the maintenance is easy and convenient.

Manganese steel-made sliding rail of the feed boom has high strength structure and superior resistance to wear.

自動接卸桿系統

儲桿和自動接卸桿的功能操作簡單，采用單個手柄就可以實現接桿、收桿、機械手開合以及鉆桿倒庫的全部動作。

接卸桿采用上下夾緊的方式便于松開鉆桿接頭，提高了工作效率�？蓪崿F(xiàn)一鍵換桿，快捷安全。

Automaticpipehandlingsystem

All the functions,such as pipe storage,pipe loading and unloading,movement of the mechanical clamps, can be controlled very easily with one single joystick.

Loading and unloading of the drill pipes are easily achieved by upper and lower clamping,greatly raising the working efficiency.

Installing one-button automatic rod exchange system, faster and safer。

操作系統

操縱閥集中布置，便于鉆機的各項操作控制。采用手動、電液壓操作系統，性能可靠，操作簡單，維護成本低。

快速推進及提升操作，減少輔助時間，提高效率。推進力大小可根據鉆進需要隨時調節。

Operation system

The concentrated levers make the operation more easier. The adoption of massive manual and hydraulic operation systems ensures reliable performance,simple operation and low maintenance cost.

Fast feeding and lifting decrease auxiliary time and increase working efficiency. Feeding force can be adjusted anytime if needed.

底盤系統

采用工程機械四輪一帶底盤，結構強度好，加寬履帶行走平穩，爬坡能力強，鑿巖作業時更加平穩。

浮動式車架，前后浮動10°，行走高低雙速可調，工地間轉移快捷。

Undercarriage

The heavy-duty undercarriage features robust structural strength,wide tracks and excellent grade ability,which all ensure better stability while drilling.

The undercarriage can oscillate 10°back and forth, featuring adjustable dual speed and fast maneuverability between sites.

免維護推進機構

液壓機械雙重鎖定，既保證液壓馬達的大扭矩穩定輸出，使用壽命長，機械鎖定又杜絕液壓內泄，防止下滑，二者結合，各取所長。

技術更先進，并不需要日常加油維護。

Maintenance-fee feeding system

Double locked hydraulic motor not only guarantees the stable output of high torque.

Applied with more advanced technology, It doesn't need routine lubrication maintenance.

動力系統

…………………………………

采用國Ⅲ排放標準電噴大功率渦輪增壓水冷發動機，性能強大、省油；雙級空氣過濾系統保障入氣清潔，大大降低發動機故障率。

進口品牌液壓油泵，耐壓高，排量大，質量更可靠，壽命更長。

Power train

The water-cooled EFI turbo engine offers more power,consumes less fuel and complies with the National Ill emission standard. The two-stage air filter system ensures intake of clean air and greatly reduces the engine failure rate. The imported hydraulic pump features high pressure,large displacement,reliable quality and long service life.

維護保養+

維護保養便利，保養點和檢查點觸手可及，發動機艙布局合理，多個機罩門開合方便，使得保養和服務十分便捷。

Maintenance

Maintenance and repair are very convenient as maintenance and check points are easily accessible,engine compartment is well organized,and all service doors can be easily opened and closed.

鉆桿自動潤滑系統

除塵系統

高效全液壓除塵器，帶有滑動式捕塵罩。收塵效率高，性能穩定，有效的延長了鉆機的使用壽命，保證作業人員的身體健康，環保效果好。

Dust collecting system

The efficient hydraulic dust collector is equipped with a sliding dust cover. It boasts high dust collecting efficiency and stable performance,extends the rig's service life and ensures a clean working environment for the operators.

ANYON

空壓機系統Air compressor

采用阿特拉斯原裝壓縮機系統，可提供20Bar-18.5m3壓縮氣體強勁輸出，性能可靠，適合于各種硬度巖石，實現更快進尺。

The original high-output Atlas Copco air compressor delivers pressure of 20bar and FAD of 18.5m3/min.Powerful and reliable, it suits rock formations of various hardness and offers high penetration rate with ease.

JK690一體式全液壓潛孔鉆機技術參數 Technical parameters
車體規格General
總質量	Weight	kg	12000
全長	Length	mm	7863
全寬	Width	mm	2400
全高	Height	mm	3080
底盤Undercarriage
履帶寬	Track width	mm	300
離地間隙	Ground clearance	mm	370
履帶架擺動角	Track oscillation	o	±10°
行走速度	Walking speed	Krp/h	2 （低速）3 （高速）
爬坡度	Grade ability	o	27°
發動機Engine
型號	Model	WP7G300E300
形式	Type	水冷6缸電噴柴油機
額定功率	Rated power	Kw/RPM	220/2300
燃油箱容量	Fuel tank capacity	L	400
空壓機Aircompressor
型號	Model	atbs copco
壓力	Working pressure	bar	20（高壓）
排氣輸出流量	Max. FAD	m3/min	18.5
回轉馬達	Rotarymotor
回轉速度	Rotation rate	rpm	0-70
扭矩MAX	Max. rotation torque	Nm	3300
推進方式	Feeding method	馬達驅動+縫輪鏈條型式
推進力	Feeding force	KN	12
提升力	Lifting force	KN	21
快推進*提升速度	Fast lifting rate	m/min	42
慢推進*提升速度	Lifting rate	m/ min	5.5
推進行程	Feeding stroke	mm	4148
推進補償	Feed extension	mm	1200
鉆桿儲桿器Drillpipe changer
鉆孔直徑	Hole diameter	mm	φ90-φ165
鉆桿長度	Rod length	m	3
鉆桿直徑	Rod diameter	mm	76mm/89mm
鉆桿數量	Rod quantity		6+1
鉆孔深度	Hole depth	m	21
集塵器Dustcollector
塵土脫落方式	Dust collector	液壓干式除塵（選配濕式）

[本信息來自于今日推薦網]