拋光樹脂-MB-106UP
概述:杜笙TULSION®MB-106 UP是專門用于超純水的最后段的拋光處理。杜笙TULSION®MB-106 UPis designed for use in the final polishing for production of ultra pure water.杜笙TULSION&
本信息已過期,發布者可在"已發商機"里點擊"重發"。
杜笙TULSION®MB-106 UP 是專門用于超純水的最后段的拋光處理。杜笙TULSION®MB-106 UP is designed for use in the final polishing for production of ultra pure water.
[本信息來自于今日推薦網]
杜笙TULSION®MB-106 UP適合用于電子產業 ,生產半導體及映像管產業等需要超純水的行業。具有高的交換容量及優越的物理特性。
杜笙TULSION®MB-106 UP is the ideal choice for electronic industries which manufacture semi-conductors and television tubes etc. where ultra pure water is required. The resin combines high capacity with excellent physical properties
TYPICAL CHARACTERISTICS ---------------------------------------- 基 本 特 性
TULSION® T-46 (陽) | TULSION® A-33 (陰) | |
型式(Type) | 強酸性陽離子交換樹脂 (Strong acid Cation exchange resin) | 強堿性陰離子交換樹脂 (Strong base Anion exchange resin) |
主體結構(Matrix Structure) | 苯乙烯(Cross 1inked polystyrene) | 苯乙烯(Cross 1inked polystyrene) |
功能基 (Functional Group) | 硫酸基(Sulfonic acid) | 4級胺(Quaternary ammonium Type I) |
物理性貭(Physical Form) | 球狀顆粒(Moist spherical beads) | 球狀顆粒(Moist spherical beads) |
離子型式(Ionic form supplied) | 氫(Hydrogen) | 氫氧(Hydroxide) |
粒徑范圍(U.S.mesh in wet) | 16 to 50 | 16 to 50 |
粒度范圍 (Particle Size) | 0.3 to 1.2 mm | 0.3 to 1.2 mm |
微粒含量(Fines Content) | 穿過US 50 Mesh小于0.5% (Less than 0.5% passing through 50 U.S.mesh) | 穿過US 50 Mesh小于0.5% (Less than 0.5% passing through 50 U.S.mesh) |
總交換容量 (Total Exch. Capacity) | 1.8 meq/ml minimum of 99% in hydrogen form | 1.0 meq/ml minimum of 90% in hydroxide form and less than 1% in chloride form |
PH范圍 (pH Range) | 0 to 14 | 0 to 14 |
允許溫度 (Temp. Stability) | 120°C | 60°C |
溶解率 (Solubility) | Insoluble in all common solvents | Insoluble in all common solvents |
溶出有機物(Organic leachable) | Less than 0.2 mg KMNO4 per ml of wet resin | Less than 0.2 mg KMNO4 per ml of wet resin |
密度Backwash settled density | Approx.750 gm/liter | Approx.750 gm/liter |
不純物(Impurities) | Fe=50 ppm(max) | Fe=50 ppm(max) |
Cu=50 ppm(max) | Cu=50 ppm(max) | |
Pb=50 ppm(max) | Pb=50 ppm(max) | |
球粒強度(Bead strength) | Avg. not less than 500g/bead by Chatillon test (ASTM Standard) | Avg. not less than 300g/bead by Chatillon test (ASTM Standard) |
- wephong發布的信息
- 酸回收樹脂
- 杜笙Tulsion® A-32 Fine meshISO-9001/ISO-14001/OHSAS-18000 quot;堅韌膠凝體精細型強堿性陰離子交換樹脂II型Tulsion® A-32 Fine mesh 是一款包含季胺II型官能...
- 貴液中含金溶液吸附的吸金樹脂
- 金回收: 使用TULSION® 杜笙離子交換樹脂從氫化物溶液中回收金.簡介:傳統上使用活性碳吸附金子。珍貴的金會被活性碳吸附于表面,再藉由洗滌或直接焚燒以回收金。使用離子交換樹脂回收貴金屬比活性碳還...
- 鉑金,鈀金等去除回收
- 95 是一款為了從工業廢水中去除回收鉑金鈀金等貴金屬而專門開發的螯合樹脂。Tulsion®CH-95 是一款擁有聚乙烯異硫脲官能基的大孔樹脂,這種樹脂有極高的選擇性。它也選擇其他的貴金屬,如黃金,鉑金和...
- 制糖業深度脫色樹脂 A-30MP
- 杜笙Tulsion®A-30MP ISO-9001/ISO-14001/OHSAS-18000丙烯酸大孔強堿性陰離子交換樹脂Ⅰ型Tulsion®A-30 MP 是一款具有季胺官能基的,基于聚丙烯酰胺主體結構的大孔強堿性陰離子...
- 銅,鎳,鈷,錳等金屬提取回收樹脂
- 杜笙Tulsion® CH-90ISO-9001/ISO-14001/OHSAS-18000鎳去除回收實例指南 Tulsion® CH-90 是一款具有亞氨基二乙酸官能基及非常耐久型的巨孔狀的選擇性...
- 除COD 以及其他有機物
- Tulsion® A-722 MPISO-9001/ISO-14001/OHSAS-18000具有控制孔徑的大孔強堿性Ⅰ型陰離子交換樹脂Tulsion® A-722 MP 是一款具有便于顏色和有機物去除的控制孔徑的,專門開發的大孔強堿性Ⅰ型陰離子...