羅門哈斯 混床樹脂 陰樹脂 

杜笙 TulsionA-23 均粒強堿型陰離子樹脂 強堿型 , 均粒陰離子交換樹脂
適用于超純水系統的混床用離子交換樹脂
STRONG BASE, MEDIUM EXCHANGE CAPACITY MONOSPHERE TYPE-I ANION EXCHANGE RESIN 
TULSION® A 23 UPS 強堿型離子交換樹脂 ,是一款苯乙稀系列具有四級氨的高品貭 Type-1陰性離子交換樹脂。并同時擁有絕佳的物理及化學穏定品貭。可應用于汽電共生發電廠冷凝水處理及超純水系統中的混床, 去除水中的陰性離子 。
TULSION® A 23 UPS其均勻的顆粒直徑, 能取代傳統的離子交換樹脂而得到更好的處理水貭及減少壓力損, 可以和Tulsion® T-42 UPS 一起搭配使用于2B3T及超純水系統的混床 。
TYPICAL CHARACTERISTICS – 基本特性
型式(Type):Strong Base Anion Exchange Resin
主體結構(Matrix structure):Polystyrene Copolymer
功能基(Functional group):Quaternary ammonium Type-I
離子型式(Ionic form):Chloride
均勻系數(Uniformity coefficient):Max. 1.25
平均粒徑(Harmonic Mean size)580 + 50 um.
全交換容量(Total Exchange Capacity):1.30 meq/ ml
含水份(Moisture content (approx.)):40- 48 %
pH范圍(pH range):0 to 14
溶解率(Solubility):Insoluble in all common solvents.
允許溫度(Maximum temp. stability):60°C (140oF)
微粒含量(Fines Content):Less than 0.5% through 50 U.S. mesh
密度(Backwash settled density):42 to 44 lbs/ft3 (670-710 g/l)
Shipping Weight:730 g / Lit (Approx.)
OPERATION CONDITIONS – 操作條件
操作溫度 (Operation Temp.) max C:60
樹脂床高度 (Resin Bed Depth) mm:800
采水流量 (Service Flow Rate) maxi:60 m3/hr/m3
逆洗流量(Backwash Flow Rate):5 to 10 m3/hr/m3
逆洗空間(Backwash Expansion):50 to 70 %
再生藥劑 (Regenerant):NaOH
再生藥劑用量(Regeneration levels):40 to 160 gms NaOH / Liter
再生藥劑加藥時間(Regeneration contact min.):30 – 60 mins
再生流量 (Regeneration flow rate):5 to 10 m3/hr/m3
再生慢洗 (Regeneration slow rinse):2 BV mini.
快洗 (Fast Rinse):采水流量Service Flow Rage
快洗 水量 (Fast Rinse Volume):4 to 6 BV
杜笙Tulsion T-42 UPS --------------均粒強酸形陽樹脂 , 氫 H+ / 鈉 Na+
均粒強酸性陽離子適用于超 純水的可再生混床系統
MONOSPHERE STRONG CATIONIC ION EXCHANGE RESIN FOR REGENERABLE MB
杜笙Tulsion® T-42 UPS 強酸型陽性離子交換樹脂 ,是一款有較高的交換容量 ,及同時擁有絕佳的物理及化學穏定品貭�？蓱�(yīng)用於汽電共生發電廠冷凝水處理及混床系統, 去除水中的陽性離子 。
杜笙 Tulsion T-42 UPS 其均勻的顆粒直徑, 能取代傳統的離子交換樹脂, 並可以減少壓 力損, 可以和 杜笙Tulsion® A-23 UPS 一起搭配使用於2B3T及超純水可再生的混床。
TYPICAL CHARACTERISTICS – 基本特性
型式(Type):Strong acid Cation exchange resin
主體結構(Matrix structure):Cross linked polystyrene
功能基(Functional group):Sulphonic
物理形式(Physical form):Moist spherical beads.
離子型式(Ionic form):Hydrogen (H+)
粒徑Particle size ( 英國Mesh):Particle less than 0.3mm max. 1%
均勻係數(Uniformity Coefficient)：1.25 Min
平均粒徑(Mean bead Size (mm))：0.58 ( +/- 0.05)
全交換容量(Total Exchange Capacity):1.80 meq/ ml (min.) in H+ form
含水份(Moisture content (approx.)):Approximately 53% in H+form
pH范圍(pH range):0 to 14
膨脹係數(Swelling (approximately)):-7% from Na+ to H+ form.
密度(Backwash settled density):800-840 g/l in H+ form；830-870 g/l in Na+ form
允許溫度(Maximum temp. stability):120°C in H+ form；140°C in Na+form
溶解率(Solubility):Insoluble in all common solvents.
OPERATION CONDITIONS – 操 作 條 件
最大操作溫度(Operating temperature , max 0 C):120
操作pH范圍(Operating pH range ):0 – 14
最小樹脂床高度(Bed depth , mini mm):800
最大(Service flow rate ,Maxi ):120 m3/hr/ m3
逆洗水量(Backwash flow rate):9 to 25 m3/hr/ m3
逆洗浮動空間(Back wash expansion):40 to 75%
再生藥剤(Regenerant ):HCl, H2SO4 for H+ form,
再生藥劑用量(Regeneration levels. ):30 to 120 gms HCl/ lit.；40 to 250 gms H2SO4/ lit.
再生藥劑濃度(Regeneration concentration):3 - 5% HCl, 1.5 to 3% H2SO4
最少通再生藥劑時間(Regeneration Contact time, mini):-20 min.
再生流量(Regeneration flow rate ):5 to 16 m3/hr/ m3
Regeneration slow rinse:2 BV mini.
快洗用水(Fast Rinse ):Service flow rate.
快洗水量(Fast Rinse Volume):2 to 3 BV