高硬度耐摩擦ABS油墨
概述:1.適用範圍: 加硬PC、加硬PMMA、噴PU表面、噴UV漆表面、金屬、玻璃、電鍍、電泳、氧化鋁、電解板、鋁塑板、烤漆、噴塑、噴粉、氨基烘漆面、丙烯酸漆面、PA塑料尼龍、電木、玻纖、玻璃鋼、樹脂、密胺、三聚?br>本信息已過期,發布者可在"已發商機"里點擊"重發"。
1.適用範圍: 加硬PC、加硬PMMA、噴PU表面、噴UV漆表面、金屬、玻璃、電鍍、電泳、氧化鋁、電解板、鋁塑板、烤漆、噴塑、噴粉、氨基烘漆面、丙烯酸漆面、PA塑料尼龍、電木、玻纖、玻璃鋼、樹脂、密胺、三聚氰胺;
2.稀釋劑: S-003專用稀釋劑;
3.用量:用300目網版每公斤約可印30平方米;
4.固化劑:要加10%固化劑,TA-9或TAB-007兩種固化劑;
5.幹燥方法:自然揮發幹燥的, 墨層表幹時間5-10分鐘:實幹時間在24小時以內。
註意事項
1、試印確認符合要求後再批量生產。
2、做好被印物的表面清除油脂及雜質工作,以促進附著效果。
3、需要套色時,應在前顏色表幹或硬幹後再進行套色工作。
4、附著力、硬度、耐酸性、耐油性、耐去漬油性、抗劃傷性、耐磨性等性能的檢測,需要墨層
完全固化後方可檢測。
5、未經允許情況下,不得將本系列油墨與其它類型油墨混用及配色。
6、添加固化劑後的使用時限:加入固化劑後的油墨使用時間為4-6小時,環境溫度越高使用時間越短,剩余油墨不可回收。
7、油墨,稀釋劑使用及儲存時嚴禁煙火。
1. scope: harden PC, hard PMMA, PU, UV surface spray spray paint surface, metal, glass, electroplating, electrophoresis, alumina, electrolytic plate, aluminum plate, paint, spray, spray, paint, acrylic amino baking paint, PA plastic, nylon, bakelite, glass fiber, glass fiber, resin, melamine melamine;
2. diluent: S-003 special diluent;
3. dosage: the 300 mesh net plate can be printed about 30 square meters per kilogram.
4. curing agent: to add 10% curing agent, TA-9 or TAB-007 two kinds of curing agent;
5. drying method: natural volatilization drying, ink layer table dry time 5-10 minutes: dry time in 24 hours.
Precautions
1. The test print confirms the batch production after it meets the requirements.
2, do a good job of removing oil and impurities on the surface of the printed material to promote the attached effect.
3, need to register, should be before the color table dry or hard after the registration work.
4, attachment, hardness, acid resistance, oil resistance, oil resistance, scratch resistance, abrasion resistance and other properties, and the need for the ink layer
Complete curing can be detected in the rear.
5. In the absence of permission, this series of ink can not be mixed with other types of ink and color matching.
6, the time limit for adding the curing agent is: the time of using ink after adding the curing agent is 4-6 hours, the shorter the time of using the environmental temperature is, the remaining ink is not recyclable.
7. Ink, the use and storage of diluents strictly prohibit fireworks.[本信息來自于今日推薦網]
2.稀釋劑: S-003專用稀釋劑;
3.用量:用300目網版每公斤約可印30平方米;
4.固化劑:要加10%固化劑,TA-9或TAB-007兩種固化劑;
5.幹燥方法:自然揮發幹燥的, 墨層表幹時間5-10分鐘:實幹時間在24小時以內。
註意事項
1、試印確認符合要求後再批量生產。
2、做好被印物的表面清除油脂及雜質工作,以促進附著效果。
3、需要套色時,應在前顏色表幹或硬幹後再進行套色工作。
4、附著力、硬度、耐酸性、耐油性、耐去漬油性、抗劃傷性、耐磨性等性能的檢測,需要墨層
完全固化後方可檢測。
5、未經允許情況下,不得將本系列油墨與其它類型油墨混用及配色。
6、添加固化劑後的使用時限:加入固化劑後的油墨使用時間為4-6小時,環境溫度越高使用時間越短,剩余油墨不可回收。
7、油墨,稀釋劑使用及儲存時嚴禁煙火。
1. scope: harden PC, hard PMMA, PU, UV surface spray spray paint surface, metal, glass, electroplating, electrophoresis, alumina, electrolytic plate, aluminum plate, paint, spray, spray, paint, acrylic amino baking paint, PA plastic, nylon, bakelite, glass fiber, glass fiber, resin, melamine melamine;
2. diluent: S-003 special diluent;
3. dosage: the 300 mesh net plate can be printed about 30 square meters per kilogram.
4. curing agent: to add 10% curing agent, TA-9 or TAB-007 two kinds of curing agent;
5. drying method: natural volatilization drying, ink layer table dry time 5-10 minutes: dry time in 24 hours.
Precautions
1. The test print confirms the batch production after it meets the requirements.
2, do a good job of removing oil and impurities on the surface of the printed material to promote the attached effect.
3, need to register, should be before the color table dry or hard after the registration work.
4, attachment, hardness, acid resistance, oil resistance, oil resistance, scratch resistance, abrasion resistance and other properties, and the need for the ink layer
Complete curing can be detected in the rear.
5. In the absence of permission, this series of ink can not be mixed with other types of ink and color matching.
6, the time limit for adding the curing agent is: the time of using ink after adding the curing agent is 4-6 hours, the shorter the time of using the environmental temperature is, the remaining ink is not recyclable.
7. Ink, the use and storage of diluents strictly prohibit fireworks.[本信息來自于今日推薦網]
- kx888888發布的信息
- 三聚氰胺板油墨專用三聚氰胺板油墨
- 1.適印在電木、電泳、膠木、漆面等材質上 2.自干免烘烤型,高光澤,不產生桔皮,高耐酒精和磨擦...
- 木板表面絲印移印油墨
- 1、油墨特性:UV光油表面絲印UV油墨,屬于紫外線光固UV型絲印油墨。 2、適用材料:五金表面噴過油漆,烤漆,手機、MP3、電腦、電子字典、電器按鍵、汽車配件等產品上有過UV涂層工序再進行移印或絲印工藝。...
- 木板絲印油墨木板表面絲印油墨
- 高級自干油墨,漆膜堅硬、柔韌光亮豐滿,保護性及遮蓋力特佳,機械性強,顏色鮮艷持久 由多種改良耐候樹脂組成,高品質,遮蓋力強。優良的附著力及層間密著性,為涂裝作了物理性能的良好基矗...
- 大理石絲印油墨大理石表面絲印油墨
- 油墨特性: 1. 具有光澤優、附著力佳、色彩鮮艷 2. 慢干之特點,絲移移印均可 3、耐白電油、耐酒精程度佳;...
- 電鍍移印UV油墨
- 油墨特性: 1. 具有光澤優、附著力佳、色彩鮮艷 2. 慢干之特點,絲移移印均可 3、耐白電油、耐酒精程度佳;...
- 電鍍絲印UV油墨
- 油墨特性:主要用于工電鍍、電鍍表面.金屬.玻璃等材料上,具有高色澤、高色彩、高遮蓋力、高穩定性、耐酒精及耐磨擦之特點。 印刷:絲印移印均可。...
油墨重發信息
- 耐甲苯橡膠管
- 液壓升降籃式研磨機, 涂料油墨研磨機,真空式籃式研磨機,液壓
- 潤華國際物流提供油漆油墨涂料出口新加坡走化工物流專線渠道
- 涂料油墨消泡劑
- HC-708汽車內飾PP塑料件儲物盒植絨膠水
- MCJ-01油墨耐磨擦試驗機 印刷耐磨擦試驗機
- 油漆齒輪泵 5cc齒輪泵
- 標準光源對色燈箱/四光源對色燈箱
- 美國Taber5135耐磨試驗機
- 代替日本星光806塑料薄膜油墨樹脂
- 金光紅C又稱金光紅CN
- 蘇州噴碼機油墨批發 日立噴碼機油墨 昆山噴碼機耗材批發商
- 西安戶外香蕉傘印字 大理石底座遮陽傘 墨綠酒紅2.5米方傘
- 回收油墨
- DISK3cc靜電輸漆齒輪泵圓形涂料齒輪泵浦